HAGON TWIN SHOCKS

HAGON SHOCKS
from the
US DISTRIBUTOR

TWIN SHOCKS FROM
$218.00 TO $386.00

Dave Quinn Motorcycles Inc. is the sole distributor for HAGON Shocks in America. Our extensive stocks of Hagon twin shocks and spares and our 18 years experience in fitting standard and custom applications make us the best choice for your twin shock needs. Every Hagon Shock we sell is inspected before we ship for quality and accuracy of build. We extend Hagon's

TWO YEAR UNLIMITED MILEAGE WARRANTY

against failure for the HAGON shocks we sell.
Warranty does not cover bent shocks due to accident, impact, dropped bike, improper installation or owner malfunction. Questions about our warranty? Give us a call.

HAGON TWIN SHOCKS are based on a common damping body, available in BLACK PAINTED (Hagon "ROAD SHOCKS" Type A) or either POLISHED STAINLESS or CHROME PLATED (Hagon "CUSTOM SHOCKS" Type P) conditions- Hagons are phasing out CHROME CUSTOM shock bodies and replacing them with polished STAINLESS STEEL bodies. We will make the changeover as STAINLESS STEEL CUSTOM SHOCKS become available. Call for up-to-date information.

Damping bodies feature double sealed Nitrogen cells, automatic compression and rebound damping control and hard chrome piston rod.

Shock bodies are available in Soft, Medium, Hard and Extra Hard damping levels; Hagons' spec for your bike will tell us the length and damping level that your bike needs, and the mounting bushings that will need to be fitted. It is useful if you measure your current shocks' length and bush sizes before you order so we can reconfirm your specs.
RIGHT: 290mm TYPE A BLACK PAINTED BODY
350mm TYPE P CUSTOM BODY

Fork bottom shocks are manufactured for Hondas in 310, 335 and 360mm lengths, and for Suzukis in 330mm only. Sorry, fork bottom shocks are not available in custom lengths.

An alloy adjuster ring is fitted on to the body, which rotates to provide three levels of spring preload (adjusting wrench is provided with the shocks). The Mylar HAGON labels easily peel off the adjuster ring, and you can polish the rings if a chrome-like look is desired, or paint them black to resemble OEM Girling units.

Hagon Twin Road shocks are available from our stocks in lengths from 280mm to 350mm in 10 mm increments, plus special applications like the 370mm shocks for PC800s. Hagons' spec for your bike will specify the length you need. The chart below shows the range of motion for most lengths of twin shocks.

Extended......Fully compressed.......Travel
420mm/16.5"............11.8"............ 4.7"
390mm/15.6".........10.6"............ 5.0"
370mm/14.6"............10.4"............ 4.2"
360mm/14.2"............11.2"............ 3.2"
350mm/13.8"............10.8"............ 3.2"
340mm/13.4"............10.4"............ 3.2"
330mm/13.0"............10.0"............ 3.2"
320mm/12.6"............ 9.4"............. 3.2"
310mm/12.2"............ 9.0"............. 3.2"
300mm/11.8"............ 8.6"............. 3.2"
290mm/11.4"............ 8.6"............. 2.8"
280mm/11.0"............ 8.6"............. 2.4"
270mm/10.6".......... 8.6"............. 2.0"
255mm/10.0".......... 7.8"............. 2.2"

SPECIAL ORDER ONLY
255mm SHOCKS ARE AVAILABLE IN HH BODY ONLY

If you want to LOWER the bike, we can usually build the spec onto a shorter shock body, at no extra charge. The fully compressed length is critical- you need to determine the clearance issues between back wheel and fender.

If you want to do some experimenting by substituting for the current shocks two blocks of wood or pieces of pipe cut to the compressed length, you will gain a sense of what will work and what won't.

WHAT DO YOU WANT YOUR SHOCKS TO LOOK LIKE?

We can build Hagons' Twin Shocks in BLACK or CUSTOM (chrome or polished Stainless) BODIES in a variety of styles.
PLEASE NOTE: GIRLING springs and shrouds WILL NOT FIT Hagon Twin Shocks.

SPRINGS are available in two diameters:
SLIMLINE SPRINGS are 2.125" diameter in in BLACK or CHROME
WIDELINE SPRINGS are 2.4" diameter in CHROME (A few WIDELINE springs are now available in BLACK-CALL for details)
SLIMLINE and WIDELINE SPRINGS have the same rating and performance, the difference is cosmetic only.

HALF SHROUDS are POLISHED STAINLESS STEEL, to fit over SLIMLINE or WIDELINE springs- $52.00 a pair.

FULL SHROUDS:

SLIMLINE STAINLESS STEEL FULL SHROUD SETS -Black painted uppers and polished lowers $95 a set of four pieces
OR
"FAT BOY" STAINLESS STEEL SHROUD SETS - polished uppers and lowers, also $95 a set of four pieces.

SLIM LINE FULL SHROUD SETS are available in CHROME PLATED MILD STEEL UPPERS AND LOWERS ($65 for a set of 4 pieces) ONLY until stocks run out- we will then supply them in polished stainless steel.

Type A shocks

BLACK BODY TYPE A SHOCKS with prices, from LEFT to RIGHT

#1 CHROME SLIMLINE SPRING $218.00

#2 BLACK SLIMLINE SPRING $218.00

#3 CHROME WIDELINE SPRING $218.00

#4 CLASSIC I - BLACK SLIMLINE SPRING STAINLESS TOP SHROUD $270.00

#5 CLASSIC I - CHROME SLIMLINE SPRING STAINLESS TOP SHROUD $270.00

#6 CLASSIC I - BLACK WIDELINE SPRING STAINLESS TOP SHROUD $270.00
(Selected spring rates only)

#7 CLASSIC I - CHROME WIDELINE SPRING STAINLESS TOP SHROUD $270.00

#8 CLASSIC II - FULL SHROUDS-CHROME UPPERS & LOWERS $313.00
for SLIMLINE SPRINGS

#9 CLASSIC III - FULL STAINLESS SHROUDS-BLACK PAINTED UPPERS & POLISHED LOWERS $313.00
for SLIMLINE SPRINGS

CUSTOM TYPE P SHOCKS with prices, from LEFT to RIGHT

#1 CHROME WIDELINE SPRING $291.00
(Chrome Slimline spring also available, $291.00)

#2 BLACK WIDELINE SPRING $291.00
(Not available in all spring rates. Black slimline spring also available, $291.00)

#3 CLASSIC I - BLACK WIDELINE SPRING STAINLESS TOP SHROUD $343.00
(Not available in all spring rates. Black slimline spring and Stainless top shroud $343.00)

#4 CLASSIC I - CHROME WIDELINE SPRING STAINLESS TOP SHROUD $343.00
(Chrome slimline spring stainless top shroud $343.00)

#5 CLASSIC II - SLIMLINE SPRING W/ CHROME FULL SHROUDS $386.00

#6 CLASSIC III - SLIMLINE SPRING W/ PAINTED & POLISHED STAINLESS STEEL FULL SHROUDS $386.00

#7 POLISHED STAINLESS 'FAT BOY' SHROUDS $386.00

ORDERING HAGON TWIN SHOCKS

WHY CAN'T I ORDER ONLINE?

We are reluctant to sell shocks here on the web site because we refuse to sell 'one-size-fits-all' shocks. We find that there are enough variations in model specs. and rider conditions that it it necessary to have direct contact with the end user. Shocks are not returnable once fitted to your bike, so in order to ensure that Hagons specification will fit both your bike and your loading conditions, we need some information from you about your bike, your weight and your riding habits.

FOR MORE INFORMATION OR TO ORDER HAGON SHOCKS, please
---Call us at 203-393-2651 from 9 to 5 Eastern M T Th F, 9-12 Sa. or
---email us at dqmcs@earthlink.net or
---fax us at 203-393-1725 or
---click CONTACT US at the top of this page

We'll need you to specify:
--the year, make and model of the bike
--the rider's weight
--if you carry a passenger? passenger weight? % of time you ride two up?
--whether a fairing, saddlebags or a top case are fitted, and how much weight you carry in each
--your anticipated MAXIMUM LOADING in pounds
--how the bike is used, i.e highway, backroads, off road, track days, race etc

Because we stock Twin shock lengths from 290 mm to 420mm in soft, medium and hard damping and have a variety of progressive springs available in each length, we can easily build twin shock specials and specs not listed in Hagon's applications charts. If you don't see your bike listed, CALL!

PRICES QUOTED DO NOT INCLUDE SHIPPING. We ship by UPS charged at cost, which will vary based on your Zip Code and the weight of the box. We do not charge handling or any other surcharges.

FOR APPLICATIONS CHARTS OR TO VISIT HAGONS' WEBSITE

CLICK HERE

FOR NITRO STAINLESS TWIN SHOCK INFO CLICK HERE

FOR SPECIALTY TWIN SHOCK INFO
CLICK HERE

FOR MONOSHOCK INFO CLICK HERE

HOME

CONTACT US

Store

COPYRIGHT 2008 Maggie Adair Quinn ALL RIGHTS RESERVED
Reproduction of text or images from this page is expressly prohibited without the permission of Dave Quinn Motorcycles Inc.